Frederick Electrical Company handles electrical work for homeowners, landlords, property managers, and businesses across Frederick and the surrounding area. Whether you need a tripped breaker traced, a panel upgraded to handle a new load, or a full rewiring of an older home, we cover the full range of residential and commercial electrical work. We are open every day from 5:30 AM to 9:00 PM, so you are not waiting until Monday to get a problem looked at.
Flickering lights fixed. Dead outlets revived. Power back on.
Call (240) 269-2329 for a quote.
Seeing flickering lights or a warm outlet? Those are symptoms worth taking seriously, not ignoring until something fails. A flickering light can point to a loose connection, an overloaded circuit, or a failing breaker. A warm or sparking outlet often means a wiring fault behind the wall. A burning smell from an outlet or switch is a sign to stop using it and call right away.
When we come out for a diagnostic visit, we start with the symptom and work back to the source. That means checking the circuit, testing the connections, and confirming what is causing the fault before any repair starts. GFCI and AFCI protection are part of that picture too. Ground-fault and arc-fault breakers are designed to catch the kind of faults that cause fires and shocks, and if yours are tripping repeatedly, that is a signal the circuit needs attention, not just a reset. We handle breaker and fuse repairs, outlet and switch faults, and power surge damage repair as part of our standard troubleshooting work.
You get clear communication from the first call to the final test. We'll trace it, fix it, and test it before we leave.
An older home in Frederick may still be running on a 100-amp service or a fuse box that was not sized for today's electrical loads. When you add a home office, a large appliance, an EV charger, or a basement circuit, the existing panel may not have the capacity to handle it safely. Breakers that trip under normal use, lights that dim when an appliance kicks on, and fuse boxes that can no longer be insured are all common reasons homeowners in this area schedule a panel upgrade.
A service upgrade involves replacing the main panel, updating the service entrance and meter connection where needed, and running a load calculation to confirm the new service size fits the home. We also install subpanels where a detached garage, a workshop, or a finished basement needs its own dedicated capacity. Panel and wiring work is finished to code, and the scope is confirmed on the call before anything is scheduled.
If you are not sure whether your panel is the problem, call for a quote. We can discuss what you are seeing on the phone and let you know what the visit will cover.
Wiring a home right takes the right tools and a careful hand, and that applies whether the job is a single outlet or a full lighting overhaul. We install standard and GFCI outlets, AFCI outlets, USB outlets, and dedicated circuits for areas where protection is required by code. Dimmer switches, smart switches, and standard replacements are all part of the work.
On the lighting side, we handle recessed and LED lighting, under-cabinet lighting, ceiling fan installation, outdoor and landscape lighting, motion sensor lights, and security lighting. Whether you are updating a kitchen, adding exterior fixtures, or replacing a ceiling fan that stopped working, the job gets done with the wiring done properly, start to finish.
Pick the date. We do the wiring. We clean up after.
Electrical problems don't wait, and neither do we, especially when the wiring itself is the source of the problem. Whole-home rewiring is common in older Frederick neighborhoods where the original wiring has reached the end of its useful life or no longer meets current code. We also add dedicated appliance circuits for dryers, refrigerators, ranges, and other high-draw equipment that should not share a circuit with other loads.
Adding a basement circuit, running a sump-pump circuit, or wiring a finished space from scratch all fall under this category as well. Where aluminum branch wiring or knob-and-tube wiring is present, we assess the full scope before recommending a path forward. Those situations get their own section below because they come up often enough in this area to warrant a closer look. Call us and we'll walk you through the fix.
Frederick County has some of the oldest housing stock in Maryland, and that means older wiring systems are common across established neighborhoods. At the same time, EV adoption in this region is among the highest in the country, and Mid-Atlantic storm seasons bring outages that push homeowners toward backup power. The three services below reflect what comes up most often in this area.
Knob-and-tube wiring dates back to the early twentieth century and was standard in homes built before the 1950s. It lacks a ground wire, it was not designed for modern electrical loads, and it can create serious hazards when it has been modified or insulated over the years. Aluminum branch wiring, common in homes built in the 1960s and 1970s, presents its own concerns at connections and outlets where it meets copper devices.
Both situations call for a careful assessment before any work starts. We evaluate what is present, identify where the risk is concentrated, and either remediate the connections or rewire the affected circuits depending on the scope. The goal is to bring the system up to a level where it handles current loads safely and meets the code inspectors in Frederick County enforce.
A Level 2 EV charger runs on a 240-volt dedicated circuit and delivers a full charge overnight rather than the trickle you get from a standard outlet. Installing one means checking the panel for available capacity, running the dedicated circuit to the garage or parking area, and connecting the charger with the correct wire gauge and breaker size for the unit.
If the panel does not have room, a subpanel or service upgrade may be part of the conversation. We scope that on the call so you know what the job involves before anyone comes out. EV charger installation cost depends on the distance from the panel and whether any panel work is needed. Call for a quote and we will go through it with you. One call is enough to get the visit booked.
When a nor'easter or ice storm knocks out power in Frederick County, a standby generator can keep the heat running, the sump pump working, and the lights on. The electrical side of that installation is what we handle: the transfer switch, the wiring between the generator and the panel, and the integration that allows the system to switch over cleanly when utility power fails.
A properly wired transfer switch prevents backfeed onto the utility line and keeps the generator from powering circuits it was not sized for. We confirm the panel can handle the generator's output and that the wiring meets current code before the job is complete. The generator unit itself is a separate purchase. We handle the hookup and the electrical connection that makes it work.
A single power surge, whether from a nearby lightning strike or a utility fluctuation, can damage appliances, electronics, and wiring throughout a home. Whole-home surge protection installs at the panel and intercepts voltage spikes before they reach individual circuits. It works alongside point-of-use protectors rather than replacing them, and it is one of the more straightforward upgrades a homeowner can add.
Electrical safety inspections cover the panel, the wiring, the outlets, and the grounding and bonding throughout the home. They are worth scheduling when buying an older property, after a significant storm, or any time the wiring has not been looked at in years. We check for code violations, deteriorated wiring, improper connections, and circuits that are not adequately protected. Hard-wired smoke detectors and carbon monoxide detectors are part of a safety visit as well. Prompt response, even for last-minute electrical calls, means you are not waiting weeks to get a safety concern addressed.
Property managers, office tenants, retail spaces, and small commercial buildings all have electrical needs that do not fit a standard residential service call. We handle panel upgrades sized for commercial loads, lighting installation and replacement, dedicated circuits for equipment, troubleshooting for intermittent faults, and code-correction wiring when a building has failed an inspection or needs to be brought current before a sale or tenant change.
Being local means we're easy to reach and easy to work with. Commercial jobs get the same direct communication as residential ones: the scope discussed on the call, the price confirmed before the visit, and the work completed to the standard the building requires. We'll get your lights back on fast.
Scheduling a service call is simple, and you get the rate on the phone before anything is booked. When you call, we go through what you are seeing, scope the job based on what you describe, and confirm the price before the visit is scheduled. There are no forms to fill out and no waiting for a callback to find out what the work costs.
We are open every day from 5:30 AM to 9:00 PM, including weekends and holidays. That covers early-morning calls before work and evening calls when something comes up after hours. If the job is urgent or you need to get on the schedule quickly, ask what is available when you call.
Quick to arrive. Careful with your home. Clean when we leave.
We serve Frederick and the towns throughout Frederick County and the surrounding region, including Hagerstown, Thurmont, Middletown, Brunswick, Mount Airy, Emmitsburg, Walkersville, and New Market. Whether the job is in a historic rowhouse near downtown Frederick or a newer build in the county's outlying communities, we cover the area.
We cover the full range of residential and commercial electrical work in Frederick and throughout Frederick County. That includes repairs and troubleshooting, breaker panel upgrades, full rewiring, outlet and switch installation, lighting, ceiling fans, EV charger circuits, backup generator hookups, and whole-home surge protection.
If you are not sure whether a job falls within our scope, call (240) 269-2329 and we will go through it with you.
Yes. Older homes across Frederick County commonly have knob-and-tube wiring, aluminum branch circuits, or undersized panels that were not built for today's electrical loads. We assess what is present before recommending any work, and we explain the scope clearly on the call so you know what the visit will cover.
We are open every day from 5:30 AM to 9:00 PM, including Saturdays and Sundays. If something goes wrong over the weekend, you do not have to wait until Monday to get it looked at.
Call (240) 269-2329 and we will go over the job and get it on the schedule.
That depends on the current schedule, and the best way to find out is to call. We take short-notice work and answer calls daily from 5:30 AM to 9:00 PM. When you call, ask what the schedule allows and we will give you a straight answer.
When you call, we go through what the job involves and give you a price before anything is booked. The rate is confirmed before the visit is scheduled, so you know what the work covers before anyone comes out. For larger projects where the full scope requires a site visit, we will tell you that on the call rather than give you a number that does not hold.
The more detail you can share, the better. For a repair call, describe the symptom: what is flickering, where the outlet is located, whether the breaker has tripped, and how long the problem has been happening. For larger jobs like a panel upgrade or rewiring project, knowing the age of the home and the current panel size helps us scope the work before the visit.
A breaker that trips repeatedly under normal use is a sign the circuit is overloaded or there is a fault somewhere in the wiring. Do not keep resetting it without understanding why it is tripping. Call us and we will go through what you are seeing on the phone, then schedule a diagnostic visit to trace the problem to its source.
Signs worth paying attention to include outlets with no ground slot, a fuse box instead of a breaker panel, lights that dim when an appliance kicks on, and wiring that has not been looked at in many years. An electrical safety inspection gives you a clear picture of what the system has and what it needs, without committing to any repair work upfront.
It depends on the work. Some repairs and outlet replacements can be done with the affected circuit de-energized while the rest of the home stays on. Panel work and service upgrades require the main power to be off for part of the job. We go over what to expect on the call.
Residential repairs, panel upgrades, rewiring, EV charger installation, generator hookups, and commercial electrical work are all available in Frederick and across Frederick County. We are open every day from 5:30 AM to 9:00 PM.
Flickering lights fixed. Dead outlets revived. Power back on.
Call (240) 269-2329 for a quote.
We handle electrical work across the full range of what homes and businesses in Frederick need, from a single dead outlet to a panel replacement to a full rewiring project. Every job starts with a clear scope and a price confirmed before anything is scheduled. The table below lays out what each service covers, who it fits, and what is worth knowing before you call. Open every day from 5:30 AM to 9:00 PM, including weekends.
| Service | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Electrical Panel Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Subpanel installation, Load calculation for added equipment | Older homes adding EV chargers, major appliances, or finishing new living space | Panel and wiring work is finished to code, and a load calculation confirms the service size before the upgrade is scoped. Undersized service is the most common reason newer equipment trips breakers from the start. |
| Whole-Home Surge Protection | Panel-level surge device installation, Protection for all downstream circuits, Pairing with panel upgrades or inspections | Homes with sensitive electronics, home offices, or equipment that is expensive to replace | A surge protector at the panel guards every circuit in the house against voltage spikes from lightning, utility switching, and large appliances cycling on and off. It is a straightforward addition during any panel visit. |
| Wiring & Circuit Installation | New circuit runs from panel to location, Home addition and basement wiring, Garage and detached structure wiring, Code-compliant wire sizing and routing | Additions, renovations, and spaces being finished or converted | Wire gauge, circuit breaker size, and routing path all depend on the load the circuit needs to carry. We size everything to what the space will actually draw. |
| Ceiling Fan Installation | Fan and light kit installation, Switch and remote wiring, Box replacement for fan-rated support, New circuit if needed | Bedrooms and living spaces adding a fan where only a light fixture exists now | Standard light fixture boxes are not rated to support a ceiling fan. We replace the box when needed so the mount is solid before the fan goes up. |
| Outlet & Switch Installation | GFCI and AFCI outlet installation, USB outlet and dimmer upgrades, 240V outlets for appliances, Switch replacement and new locations | Rooms that need more outlets, safer outlets, or modern switch controls | Kitchens, bathrooms, garages, and outdoor locations require GFCI protection under current code. A panel check is sometimes needed before adding outlets to older circuits. |
| Electrical Repairs & Troubleshooting | Flickering lights and dead outlets, Burning smells and buzzing panels, Tripped breakers and GFCI faults, Circuit tracing and diagnosis | Homeowners and renters dealing with an active electrical symptom | Many symptoms share causes. We trace the fault to the source before replacing anything, which avoids repeat calls for the same problem. |
| Code-Correction Wiring | Failed inspection follow-up, Municipal and county violation repairs, GFCI and AFCI upgrades to current standards, Grounding and bonding corrections | Properties that failed a municipal or county inspection or are changing hands | Code requirements have changed significantly over the past few decades. Older wiring that was correct when it was installed may not meet what inspectors enforce today. We identify what needs correction and explain the scope before work begins. |
| Lighting Installation | Fixture replacement and new installs, Recessed and under-cabinet lighting, Outdoor and security lighting, Motion sensor and landscape wiring | Homeowners upgrading interior lighting or adding exterior security and landscape lighting | Adding multiple fixtures to a single circuit can exceed its rated load. We check capacity before the install and add a dedicated circuit when the math calls for it. |
| Basement & Sump-Pump Circuits | Dedicated sump pump circuit, Basement finishing wiring, GFCI protection in below-grade wet areas, Panel capacity check for added load | Frederick County homeowners finishing a basement or protecting against sump pump failures during storms | A sump pump on a shared circuit can lose power at the worst moment if another load trips the breaker. A dedicated circuit keeps the pump isolated from everything else in the panel. |
| Dedicated Appliance Circuits | Refrigerator, dishwasher, and microwave circuits, Washer and dryer circuits, Workshop and shed circuits, Panel slot and capacity check | Kitchens, laundry rooms, and workshops where shared circuits cause repeated tripping | A dedicated circuit isolates a single appliance from the rest of the load on a shared circuit. It reduces nuisance tripping and protects the appliance from voltage fluctuations caused by other draws. |
| Electrical Safety Inspections | Whole-home system review, Pre-purchase buyer inspections, Rental property landlord inspections, Code violation identification | Buyers, sellers, landlords, and owners who want a current picture of what their system holds | An inspection is the right first step before any rewiring or panel decision. It tells you what the property has, what code requires, and what the work actually involves. |
| Breaker & Fuse Repair | Breaker replacement and reset, Fuse box troubleshooting, Arc-fault and ground-fault breaker work, Panel interior inspection | Homes where a breaker trips repeatedly or a fuse blows without an obvious cause | A breaker that trips repeatedly is often signaling an overloaded circuit or a wiring fault, not a bad breaker. We confirm the cause before swapping hardware. |
Call (240) 269-2329 to go over the symptoms or the project, get a price, and confirm what it covers before anything is scheduled.
(240) 269-2329